When configuring the LANSA Web system, the following options are available with
Configure System, Data/Application Server:
or with Configure System, Web Server:
The Reset button will retrieve default values from the host system. This option is enabled if the host system to which you are connected supports retrieving default values. Note that you need to select OK to save the settings after you have retrieved them. Also note that Job Queues and Libraries are NOT replaced with default values.
IBM i Servers:
If you are using a multi-tier IBM i installation with an IBM i CGI-based Web Server, you will need to specify the options you wish to use for the Web Server System (IBM i only). You will need to connect to the relevant IBM i to set up each of the systems. The Web Server setting can also be changed using the W3@P2901 program.
If you are using a Windows Multi-Tier installation, then you will only need to specify the options you wish to use for the Windows Data/Application Server.
The Web Server settings for the parameters used by the LANSA Web Server Extension are configured using the 1.2.2 LANSA Web Server Extension section.